Vector VEC010C Información técnica descargar pdf (Pagina 69)

Getting Started

MicroVAX 3100 Models 88/98 User Information

2-33

__________________________ Note _____________________________

Before removing the system unit from a network:

• Get the approval of the network coordinator.

• See the operating system documentation for

information on the shutdown procedures before

stopping or turning off the system.

• If the system is the server in a network, do not turn off,

halt or restart the system without notifying the other

network members.

____________________________________________________________

Removing the System Unit from a ThinWire Ethernet Cable

To remove the system unit from a ThinWire Ethernet cable,

follow these steps:

1. Power the system off.

_________________________Caution ___________________________

Disconnecting the ThinWire Ethernet terminator or the

ThinWire Ethernet cable connectors from the T-connector

may cause disruptions to network communications.

____________________________________________________________

2. Disconnect the entire T-connector from the system (see

Figure 2-10 and add a terminator to the ThinWire port on the

back of the system unit (seeFigure 2-11).

Removing the System Unit from a ThickWire Ethernet Cable

To remove the system unit from a ThickWire Ethernet cable,

follow these steps:

1. Power the system off.

2. Disconnect the transceiver cable from the ThickWire

Ethernet connector on the back of the system unit (see Figure

2-11 and replace it with a terminator (see Figure 2-10).

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 171 172

Sin comentarios

Vector VEC010C Información técnica Pagina 69